Intelligent Ready - Tektronix Phaser 850 Setup Manual

Intelligent Ready

Intelligent Ready is an automated system that monitors the printer's usage and warms up
the printer when you are most likely to need it. You can turn Intelligent Ready on or off
from the printer's front panel. PhaserLink Printer Management Software provides full
control of the printer's automatic warm-up and standby settings.
Enabling and disabling Intelligent Ready from the Phaser 850 front
panel
1.
When the front panel displays READY TO PRINT, press the down-arrow button until
Menu is highlighted. Press Select.
2.
Press the down-arrow button until Printer Configuration is highlighted. Press Select.
3.
Press the down-arrow button until Default Printer Settings is highlighted. Press
Select.
4.
Press the down-arrow button until Advanced Printer Settings is highlighted. Press
Select.
5.
Press the down-arrow button until Intelligent Ready is highlighted. Press Select until
On or Off is displayed.
6.
To return the printer to normal operation, press the down-arrow button until Exit is
highlighted. Press Select.
Setting up Intelligent Ready using PhaserLink Printer Management
Software
1.
Connect to the printer via PhaserLink (see Accessing the printer from a browser on
page 33).
2.
On the left side of the page, click Settings.
3.
In the SETTINGS group, click Warm-up Settings.
4.
Follow the instructions on the page to set up Intelligent Ready or standby settings.
5.
Click Apply to save your changes.
Networking Setup Guide
Printer Management
35