Intelligent Ready Mode - Tektronix Phaser 750DP User Manual

Advanced Printing Features for Phaser 750 Printers
Output Order: Face Up
Pages are output so that the first page is on the bottom.
Depending on the driver you are using, check the Output Face Up box on, or select
Face Up.
Output Order: Face Down
Pages are output face-down in numerical order.
Depending on the driver you are using, uncheck the Output Face Up box, or select
Face Down.
Output Order hints
When printing on transparencies, the printer always prints your document face-up.
For prints from the Multi-Purpose Tray, output order is always face-up.
If you are using the Quick Collate option — depending on the driver you are
using — select Output Face Down, or uncheck the Output Face Up box.
Note
Some applications send the printing job in the order of back to front, where the
last page of your print job comes out first and the first page comes out last. If this
occurs on your printer, select the face-up box. If only a face-down check box
exists on your printer, make sure this option is unchecked.

Intelligent Ready mode

Intelligent Ready mode is an automated system that monitors the printer's usage and
warms up the printer when you are most likely to need it. You can set Intelligent Ready
mode with PhaserLink or the printer's front panel. The front panel only allows you to turn
Intelligent Ready mode On or Off; use PhaserLink to make other settings.
1. In the printer's front panel, from the Ready prompt; press Menu.
2. Scroll to Configuration; press Menu.
3.
Scroll to Intelligent Ready; press Menu.
4.
Scroll to On or Off; press OK.
5.
To return to normal printer operation; press Exit (the far left button) until Ready is
displayed.
34 Phaser 750 Color Printer