Memory Switch Settings - Omron NT600M Series Operation Manual

Memory Switch Settings

Liquid Crystal Display Type
EL Display Type
Contents of Settings
Item
Key input sound
Backlight off (LCD type)
72
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Select "Memory SW" from the Maintenance Mode Menu.
MAINTENANCE MODE MENU
Quit
Display History
I/O Check
PT Settings
Initialize Memory
Memory SW
Move the cursor to the item that is to be set and press the Enter Key. Each time
that it is pressed, the set value will change.
After the settings have been made, press the Buzzer, Up, and Down keys to re-
turn to RUN Mode. If the power to the NT600M is turned off at this point, the set-
tings will not be registered.
MEMORY SW MENU
Quit
Key Input Sound
Backlight Off
Display
Resume Function
MEMORY SW MENU
Quit
Key Input Sound
Residual Image Elimination Function
Resume Function
Setting
ON The buzzer sounds for 0.2 second when a system key, touch switch, or
function key is input.
OFF The buzzer does not sound when a system key, touch switch, or
function key is input.
10 min If no key input (see note 1) or
command (see note 2) is received
for 10 minutes while a screen is
being displayed, the backlight
turns off.
1 hr If no key input (see note 1) or
command (see note 2) is received
for one hour while a screen is
being displayed, the backlight
turns off.
None The backlight stays on constantly.
Section 6-3
Select one
ON
10 min
Normal
ON
ON
1 hr
ON
Contents
If a backlight-off command is
transmitted from the host, the
backlight turns off regardless of
this setting.