Normal/Inverse Display (Lcd-Type Only) - Omron NT600M Series Operation Manual

Display Speed
4-11-6

Normal/Inverse Display (LCD-type Only)

4-12 Terminal Function
4-13 Display Speed
Measurement Conditions
50
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The display background can be set to either normal or inverse. The normal
background is white, and the inverse background is black.
Normal display
Normal display
This function allows you the option of displaying, by transmission on com-
mand, the codes (coordinates, type, etc.) of characters and figures you want
to display from the host, in addition to screens registered in advance. This
function is possible only when the Host Interface Unit is the NT600M-LK201
for the RS-232C or the NT600M-LK202 for the RS-422A. For details, refer to
the terminal commands listed in the RS-232C/RS-422A Interface Unit Opera-
tion Manual .
Item
Display position
Character size
Display attributes
Character designation ASCII
Graphics
Note 1. If a displayed character string exceeds the line, that string is displayed
beginning from the left side of the next line.
2. In addition, strings that do not fit at the bottom of the screen over-write
from the left side of the same screen.
NT600M display speed varies according to the amount of elements displayed
on the screen. As a standard, the following diagrams shows the time required
for changing displays on screens that include characters.
System ROM:
Host Interface Unit:
Screen data:
Measurement time:
Inverse display
Inverse display
Content
Optional
Normal, half-size, double-height, double-width, 4x, 9x, 16x,
or 64x
Normal, inverse, blinking, inverse blinking
Polyline, circle
NT600M-SMR02-EV1
NT600M-LB122-V1
Character display (1 to 40 characters)
Time (in ms) from when the PT receives the
command until the display is executed.
Section 4-13