Receiving With Distinctive Ring Service Rrrrrrrrrrrrrrrrr - Panasonic KX-F1150 Operating Instructions Manual

Receiving with distinctive ring service
This feature can only be used by those who subscribe to a distinctive ring pattern service from their
telephone company. For more information on the availability of this service, please contact your
telephone company before setting this feature on your unit.
The distinctive ring service gives you up to 3 phone numbers on a single telephone line, each having a
different ringing pattern.
When you use one of the phone numbers as a facsimile number, program the ringing pattern assigned for fax
into your unit. When the unit detects a call matching the selected distinctive ringing pattern, the unit will
activate depending on the receive mode setting.
Setting the distinctive ringing pattern
Program the ring pattern assigned for fax. Ringing patterns that can be programmed are;
A: Standard ring (One long ring)
B: Double ring (Two short rings)
C: Triple ring (Short-long-short rings)
D: Other triple ring (Short-short-long rings)
OFF: Turns off the ring pattern detection feature (pre-selected setting)
Press (MENU).
1
K CA
2
Press , then
Press (START/SET).
3
Press (‹) or (›) until the desired ringing
4
pattern appears.
Press (START/SET).
5
Press (MENU).
6
How the unit will answer in each receive mode
ANS/FAX mode: When a distinctive ringing pattern that matches your selection is detected, the unit will
automatically answer the line without ringing and activate the fax function to receive
documents.
If other ringing patterns are received, the unit will ring and activate the fax or answering
function depending on the call.
¡When receiving other ringing patterns, the unit will ring one less time than the ANS/FAX
mode ring count (p. 25) for ringing pattern detection.
FAX mode: In this mode, the unit will answer all calls and activate the fax function.
TEL mode: When a distinctive ringing pattern that matches your selection is detected, the unit will
automatically answer the line without ringing and activate the fax function to receive
documents. If other ringing patterns are received, the unit will ring until you pick up the
handset.
Note:
¡The unit automatically answers a distinctive ring call after the second ring. To change the number of rings,
change the FAX ring count (p. 24) after setting the ringing pattern.
42
SYSTEM SET UP
.
RING DETECTION
ÿŸ
MODE=OFF [ ]
Dial keypad
(MENU)
(START/SET) (‹)/(›)