Panasonic KX-F1150 Operating Instructions Manual page 52

How incoming messages are recorded in a mailbox
In order to leave a message in a mailbox, each owner of a mailbox must inform their callers of their mailbox
number in advance and set the unit to the ANS/FAX mode.
1 A caller calls your unit (only from a touch tone telephone).
¡The common greeting message will play.
They press *, then the desired mailbox number (1–3).
2
¡The personal greeting message will play, followed by a long beep.
3 They leave a message in the mailbox.
Note:
¡If a caller does not specify a mailbox in step 2, the message will be recorded into common memory.
Listening to messages in a mailbox
When there is a new message in a mailbox,
—the mailbox number in the display and the NEW MESSAGES indicator will flash, and
—a slow beep will sound if mailbox alert (page 53) is set to ON.
Press (MAIL\BOX) repeatedly until the desired
1
mailbox number is displayed.
Example: Mailbox 2
» If you leave the mailbox password as "555"
2
(pre-selected setting);
Press (NEW\MESSAGES) to listen to new
»
recorded messages, or press
(ALL\MESSAGES) to listen to all of the
recorded messages.
»
OR
» If you program your own password;
Enter your password.
¡The unit will play back the new recorded
messages.
¡If no new messages are recorded, the unit
will play back all of the recorded messages.
To exit the mailbox, press (MAIL\BOX).
3
Note:
¡The REPEAT, SKIP and STOP buttons can be used.
52
BOX2 02
PASSWORD=
(NEW\MESSAGES)
(STOP)
Dial keypad
(MAIL\BOX)
FILM/PAPER SAVE CALLS
2
ANS/ FAX TEL
MAIL BOX
FAX
(ALL\MESSAGES)
(SKIP)
(REPEAT)