Skipping A Message; Other Remote Operations - Panasonic KX-F1150 Operating Instructions Manual

During playback
» » Repeating a message
A
Press to start playing the previous message.
» » Skipping a message
B
Press to start playing the next message.
Erasing messages from memory
» » Erasing a specific message from memory
J D
Press when the message you want to erase is being played.
¡The unit will erase the message being played back.
¡A long beep followed by three short beeps will sound. Then the unit will continue with the next message.
» » Erasing all messages from memory
You can erase all of the recorded messages in memory.
To erase all of the messages in a mailbox, you must first select a mailbox.
J E
Press .
¡A long beep followed by three short beeps will sound.
¡The unit will erase all of the messages recorded in the selected memory.
Note:
¡The greeting messages will not be erased during this operation.

Other remote operations

» » Monitoring the room
You can monitor the sound in the room where the unit is installed for about 30 seconds.
1. Call your unit.
2. Press your remote operation ID.
OR
J
Press , then enter the desired mailbox number (
F
3. Press after hearing a beep.
¡After 30 seconds are up, a beep sounds.
¡To continue monitoring, press
» » Recording a marker message
After playing back the recorded messages, you can leave an additional message.
1. Wait for 3 beeps indicating the end of the remote operation.
2. Wait about 10 seconds for 2 more beeps indicating that the unit is ready for recording.
3. Leave your message.
58
A B
,
F
again within 10 seconds.
C)
or . Then enter the mailbox password.