Case 2B: Distinctive Ring (Using With Voice Mail Service) - Panasonic KX-FL611 Operating Instructions Manual

2. Preparation
2.5 Case 2b: Distinctive
Ring (using with voice mail
service)
2.5.1 Your situation
You have already subscribed to voice mail
service and also wish to receive a fax
automatically.
You must get an additional phone number by
subscribing to your telephone company's
Distinctive Ring service.
L Distinctive Ring service may be called Identa
Ring service. The name of the service
depends on the telephone company.
2.5.2 Telephone wiring image in
house or office
2 numbers example
Room
Extension Fax machine
telephone (555-1333)
(555-1333)
Telephone company service
Voice mail
(555-1111)
2.5.3 How to setup
{MENU} {A}{B}
22
Room
Single
telephone
line
(2 phone
numbers)
{SET}
For Fax Advantage assistance, call 1-800-435-7329.
1
Subscribe to Distinctive Ring service at your
local telephone company to get a new fax
number.
L You do not need to apply to a voice mail
service for the new number.
2
Press {MENU}.
3
Press {#} then {0}{0}.
4
Press {SET}.
L The Quick Setup Guide will be printed.
5
Press {A} or {B} repeatedly to display the
following.
6
Press {SET}.
L The {AUTO ANSWER} light is ON.
7
Press {MENU}.
L You cannot change the receiving mode
while the Distinctive Ring feature is
activated.
2.5.4 How phone calls and faxes
are received
If the number assigned for phone calls is called,
a voice message will be recorded in the voice
mail service. The fax machine will ignore the
incoming call.
If the number assigned for fax is called, the fax
machine will ring. If an extension telephone is
connected on the same line, it will also ring.
Then the fax machine will start fax reception
automatically.
If you subscribe to three or more phone
numbers on a single telephone line
Each phone number will be assigned a different
ring pattern by the phone company.
To use one number for fax, program the ring
pattern assigned for fax (feature #32 on page 45)
by referring to the ring pattern table (page 44).
QUICK SETUP
PRESS SET
SELECT A SETUP
=DIST. RING [±]