Table of Contents
Advertisement
Switching on the TMC
function
The TMC function is activated in the
Routing options menu (see "Specify-
ing routing options"):
➜
In the Navigation menu, touch the
Settings button.
The Settings menu displays.
➜
Touch the Routing options but-
ton.
The Routing options menu is dis-
played.
➜
Touch the Type of routing fi eld to
change to Dynamic.
The TMC function is switched on
if the Dynamic option is set. If no
TMC signal is available, the Lucca
calculates the fast route.
Adjusting TMC options
In the TMC menu, you can adjust
whether the destination guidance
should be automatically changed by
the Lucca in case of traffi c obstruc-
tions or whether it should wait for
your confi rmation:
➜
In the Navigation menu, touch the
Settings button.
➜
Touch the
screen with the TMC button ap-
pears.
➜
Touch the TMC button.
➜
Touch the Route modifi cation but-
ton to change between the two
options:
•
Automatically: The Lucca automat-
ically guides you around the traffi c
obstruction.
•
With confi rmation: The Lucca sug-
gests an alternate route in case
of a traffi c obstruction. The route
changes can be confi rmed or re-
jected.
➜
Touch OK.
Showing traffi c reports
➜
In the Navigation menu, touch the
TMC button.
The traffi c reports are displayed.
➜
Touch the arrow symbols to change
between messages.
Note:
A detailed description for operat-
ing the traffi c reports can be found
in the chapter "Information".
TMC function
button until the
51
Advertisement
Table of Contents
