Deleting A Complete Route List; Saving A Route; Loading A Route; Calculating A Route - Blaupunkt TravelPilot Lucca 3.4 Operating Instructions Manual

Deleting a complete route list

If you want to delete all the route
points from the current route list:
➜
Touch the More button.
➜
Touch Delete the complete list.

Saving a route

➜
In the Destination entry menu,
touch the More button.
➜
Touch Save route.
A menu for entering a name is dis-
played.
➜
Enter a name for the route.
➜
Touch OK.
Note:
The route points are saved. If you
load a saved route, it must be re-
calculated.

Loading a route

➜
In the Destination entry menu,
touch the More button.
➜
Touch Load route.
➜
Touch the route to be loaded.
The Itinerary menu with the select-
ed route is displayed.

Calculating a route

You can use a planned route for the
destination guidance or calculate be-
fore the trip to gain an overview of
the route in advance. The advance
route calculation does not require
GPS reception.
Starting the destination guidance
(GPS reception required)
For the destination guidance of a
planned route, the current location
is the starting point. The fi rst stage
is the travel to the fi rst route point
entered.
To start the destination guidance,
➜
load the desired route.
➜
Touch the Start navigation but-
ton.
The route is being calculated. The
map is displayed. Additional in-
formation about destination guid-
ance can be found in the chapter
"Destination guidance".
Calculating the route without GPS
reception
For the calculation of a planned route
without GPS reception, the fi rst route
Route planning
47