Showing The Route On The Map; Travelling The Route (Simulation) - Blaupunkt TravelPilot Lucca 3.4 Operating Instructions Manual

Route planning
point entered is the starting point of
the route.
After calculating the route, you can view
it on the map or take a virtual trip.
For the route calculation:
➜
load the desired route.
➜
Touch the Calculate button.
The route is being calculated. A
window displays the progress of
the calculation.
After the calculation, the Itiner-
ary menu is displayed again. The
Calculate button is no longer
available. Instead, you can view
the distance and the anticipated
travel time. The route list displays
the distances and the anticipated
travel times for each stage.
48

Showing the route on the map

➜
Touch the Show button to display
the entire route on the map.
The map is displayed.
The route is highlighted in blue.
The route points entered are iden-
tifi ed by fl ags.

Travelling the route (simulation)

➜
Touch the map.
A selection menu is displayed.
➜
Touch the Simulation button.
The route is automatically travelled
and driving recommendations are
output.
➜
Touch to end the simula-
tion. Otherwise, the simulation is
repeated.
Note:
The length of the stage may not
exceed 100 kilometres for the
simulation.