Switching Tmc On/Off; Selecting The Tmc Station With The Tmc D-Namic Tuner Box - Blaupunkt TravelPilot DX-V Operating Instructions Manual

Dynamic route guidance with TMC

Switching TMC on/off

The TMC function is switched on or off in the Route options menu.
For more information, refer to the section on "Selecting route options".
Note
If the TMC function is switched on, the options for "Fast route", "Motor-
way", "Ferry" and "Toll" will be selected automatically in the menu. If
you switch off one of these options, the TMC function will switch off au-
tomatically as well.

Selecting the TMC station with the TMC D-Namic tuner box

The "TMC D-Namic tuner box" automatically searches the frequency band in the back-
ground for TMC stations within reception range. The TMC stations within reception
range appear in a list which is updated continually.
You can select a TMC station from this list.
1. Press on the remote control unit.
!
The "Congestion" menu will appear.
2. Select "TMC station list". Press
The TMC station list will appear.
Note
If there are no TMC stations available, you will hear a beep.
3. Select the TMC station. Press
The "Congestion" menu will appear. The TMC station currently selected will
be displayed next to the menu item.
Plus Point: The "TMC D-Namic tuner box" will automatically tune into the
TMC station you have selected (preferred station). This means that after you
leave the reception area served by your preferred station (the system will
tune into a different TMC station) and return to this reception area again lat-
er, this is the station that will be selected even if other TMC stations are
.
OK
.
OK
40