Gateway: Data Backup - Siemens S7 Series Communication Instruction Manual

4 Configuration and Project Engineering
4.3

Gateway: Data backup

Table 4-3: Perform the gateway data backup
No.
1. Make sure that

your computer is in the same subnet as all
the components involved,

all the components are connected using
LAN cables,

all the components are connected to a
power supply and turned on.
2. Start your preferred web browser and connect
to the gateway web server.
Default settings:

IP address: 169.254.0.1

User: "gw"

Password: "GATEWAY"
3. If necessary, back up all gateway configuration
files using the "Backup/Restore" menu that
allows you to restore the default settings if
necessary (see the "Help > Online help" UGW
menu item).
To back up data, navigate to "General >
Backup/Restore > Backup gateway
configuration".
Click "Start" and follow the menu prompts.
Communication with S7 CPU via KNX Gateway
Entry ID: 109739689, V1.0,
Action
06/2017
Comment
See Chapter 5.2 Installing the hardware
18