External Data Backup In A Data Archive - Siemens SINUMERIK 808D ADVANCED Diagnostic Manual

Note
Archiving/data backup
It is recommended that you regularly back up the internal SINUMERIK memory on a USB stick.
You can transfer the backed up data to the SINUMERIK later on. In this way you can restore
the previous status of the unit.
You must perform an external data backup if you have made major data changes or after you
have commissioned the control system.
8.2.1

External data backup in a data archive

You can perform a complete data backup of the control system by creating a startup archive.
Backing up data externally in a data archive
Diagnostics Manual
Diagnostics Manual, 06/2015, 6FC5398-6DP10-0BA2
1. Select the desired operating area.
+
2. Press this softkey to open the window for creating or restoring a start‐
up archive.
There are three options for creating a data archive. Note that options
①
and
①
Creates a data archive for series machine commissioning
②
Creates a data archive for a complete system backup
③
Backs up the complete system data directly on the system Com‐
pactFlash Card (CF card)
The option
case of service (e.g. hardware replacement), it can be more conven‐
ient to restore the control system directly from the system CF card
than from other paths. After creating a startup archive with option ③,
the following option appears on the screen:
③
are visible only with the manufacturer password.
③
backs up exactly the same data with the option
Data backup
8.2 External data backup
②
. In
553