DOK-SUPPL*-VDP16/40/60-PR03-EN-P
Rexroth IndraControl VDP 16.1/40.1/60.1 Operator Display
1.3
Accessories
1.4
Commissioning
Using the Y-repeater (VAC01.1S-YG4-EXTN) provided as accessory part, two
VDP displays can be connected to a control cabinet PC (IPC). The Y-repeater
can be cascaded. Therefore, three or more VDPs can be connected to a control
cabinet PC.
Mount the device properly, see also
Connect the device to the de-energized control cabinet PC (IPC); then connect
the 24 V supply voltage.
Bosch Rexroth AG
System Presentation
chapter 5.3 "Installation " on page
9/69
32.