Chapter
VIP2 in Cisco 7000 Series and Cisco 7500 Series Routers
Following is an example of the show diag slot command that shows a PA-2CE1 on a VIP2 in interface
processor slot 3:
Router# show diag 3
Slot 3:
Multi-channel (E1) port adapter, 2 ports
OL-3519-01
Physical slot 3, ~physical slot 0x7, logical slot 8, CBus 0
Microcode Status 0xC
Master Enable, LED, WCS Loaded
Board is analyzed
Pending I/O Status: Console I/O
EEPROM format version 1
VIP2 controller, HW rev 2.3, board revision UNKNOWN
Serial number: 03513619
Test history: 0x00
Flags: cisco 7000 board; 7500 compatible
EEPROM contents (hex):
0x20: 01 15 02 03 00 35 9D 13 49 06 94 03 00 00 00 00
0x30: 06 3D 00 2A 1A 00 00 00 00 00 00 00 00 00 00 00
Slot database information:
Flags: 0x4
Insertion time: 0x12A0 (08:56:58 ago)
Controller Memory Size: 8 MBytes
PA Bay 0 Information:
Token Ring PA, 4 ports
EEPROM format version 1
HW rev 1.0, Board revision B0
Serial number: 02825610
PA Bay 1 Information:
EEPROM format version 255
HW rev FF.FF, Board revision UNKNOWN
Serial number: 4294967295
Part number: 73-1684-03
RMA number: 00-00-00
Part number: 73-1390-04
Part number: 255-65535-255
PA-2CE1 Channelized E1 Port Adapter Installation and Configuration
Checking the Configuration
4-17