Web Site Filtering - THOMSON TG787 Setup And User Manual

6.2

Web site Filtering

Introduction
Web site filtering allows you to restrict access to specific web sites.
Strategies
There are two strategies you can follow:
Allow access to all
- or -
Deny access to all
Procedure
Proceed as follows:
1 Enable Web site filtering and specify a default
2 Configure the exceptions.
Enable Web site filtering and specify a default action
Proceed as follows:
1 Browse to the Thomson Gateway Web
2 On the Toolbox menu, click Web Site Filtering.
3 On the Navigation
4 Select the Use Address Based Filter check box.
5 In the Action for Unknown Sites, select the action you want to use by default.
6 Click Apply.
Configure the exceptions
You can now:
Denying access to a specific Web site
Allowing access to a specific Web site
Redirecting a Web site
Redirecting all Web sites
E-DOC-CTC-20080118-0051 v2.0
web sites and manually specify which web sites may not be accessed.
web site and manually specify a number of web sites that may be accessed.
Interface.
Bar, click Configure.
6
action.
Internet Security
67