Channel Scan Memory: Adding Channels; Helpful Hints For Channel Scan Memory - Sanyo DP50747 Owner's Manual

MENU OPTION— CHANNEL SCAN MEMORY
ADDING DIGITAL OR ANALOG
CHANNELS TO MEMORY
Channel Scan Memory is a list of active channels that
you can scan through using the Channel Scan CH L
(up) CH M (down) keys. This list can be customized by
deleting and/or adding channels.
1
Press the MENU key to display the Main menu.
Use the CURSOR LM keys to highlight Channel
2
Scan Memory. Press ENTER.
HELPFUL HINTS (PROBLEMS/SOLUTIONS)
SYMPTOM
Cannot select or scan some
channels.
CHECK THESE CONDITIONS
Channels may be removed from
G
memory.
Check antenna connections.
G
NO digital signal being broadcast.
G
Weak Signal.
G
V-Guide is set to block program-
G
ming.
If you continue to experience problems, please call toll free
1-800-877-5032.
Use the CHANNEL (CH LM) keys or numerical
3
0 ~ 9 keys to select desired channel.
4
Press the ENTER key to add the channel. The
display will change to "added."
After 3 seconds the TV screen will display
"Delete?"
OPERATING TIP:
I
If one digital sub-channel is added back to the
Channel Scan Memory list, all of that channel's
sub-channels will be added back.
TRY THESE SOLUTIONS
Select Channel Scan memory and
G
manually add channels or start an
"All Channel Search."
Turn antenna, install signal
G
booster.
Set V-Guide to "Off" or press
G
RESET key to clear all settings and
restart channel search.
We can Help!
38