Option 2: Connect Analog Cable, Vcr, And An Antenna; Helpful Hints For Video1 Connections - Sanyo DP50747 Owner's Manual

VIDEO1 COMPOSITE (ANALOG) JACKS: Connection Option 2
CONNECTING ANALOG CABLE, VCR, AND AN ANTENNA TO THE DTV
1 Connect Analog Cable system to the VCR
"Antenna In."
2 Connect the VCR AV out jacks to VIDEO1 Yellow,
White, and Red jacks.
Connect an Antenna to the DTV ANT terminal.
3
IMPORTANT FACT:
Composite jacks offer only
480i (SDTV ) resolution.
…
INPUT
REMOTE CONTROL
OPERATING TIP:
Refer to the owner's manuals and user's guides that
came with your external equipment for connection
options.
SYMPTOM
"No Signal" will appear randomly
on the screen when no signal is
detected at the video jack.
CABLE SYSTEM
(Service provider)
‚
ANTENNA
„
DTV ANALOG/DIGITAL
ANTENNA IN (ANT)
HELPFUL HINTS (PROBLEMS/SOLUTIONS)
CHECK THESE CONDITIONS
Check Audio/ Video connections.
G
Check external equipment
G
connections.
Check external equipment setting.
G
If you continue to experience problems, please call toll free
4 Press INPUT to select Video 1 to watch Analog
Cable channels OR to TV channels to watch
Antenna channels.
5 Select channels with the VCR's remote control.
Select Antenna channels with the DTV remote
control.
VCR
ƒ
1-800-877-5032.
DTV VIDEO1
YELLOW, WHITE,
& RED JACKS
TRY THESE SOLUTIONS
Press the INPUT key.
G
Switch on external equipment.
G
Set external equipment output
G
connections to match input
connections.
We can Help!
24