Hdtv Back Side Panel-Jacks Locations & Functions - Sanyo DP50747 Owner's Manual

Analog / Digital Antenna Input—Connect
an RF antenna or Analog Cable system to this
jack. See PAGE 15 for Signal connections.
HDMI INPUT1/2/3 (High-Definition
Multi-media Interface), PAGE 7—
Connect digital video equipment to this
jack. It takes only one cable (not sup-
plied) to communicate
audio/video equipment and this DTV.
HDMI (DVI) INPUT1 jack is compatible
with DVI equipped AV devices. (Sepa-
rate audio connection and an adapter
are required for DVI device.) See
PAGES 18 and 19 for HDMI connec-
tion.
HDTV BACK PANEL
between
Audio/Video
analog video equipment here. See PAGES 23,
24, and 25 for AV VIDEO1 jack connection.
Note: S-Video connection overrides the (Video1) com-
Analog Audio Out (L/R) Jacks—Connect
external audio equipment here. See PAGE
27 for Audio Out jack connections.
Digital Audio Output—Use a Phono-Type
Coaxial Digital Audio Out Cable to connect
Digital Audio Output to an advanced stereo
home theater system equipped with Dolby
Digital 5.1. See PAGE 26 for Digital Audio
Out jack connection.
Input
posite video connection.
(CONTINUED ON NEXT PAGE.)
(VIDEO1)—Connect
®
11