Memorizing The Channels - Sanyo AVP-4231 Instruction Manual

42” plasma high-definition colour tv with atsc digital tuner

Hide thumbs

Table Of Contents

Table of Contents

This unit can automatically find all channels available through antenna or cable inputs, and store them in memory.

Note: Be sure to select the TV source before operation.

Selecting the Tuning Band

Before your TV can memorize the available channels, you must specify the type of signal source that is connected

to the unit. (i.e., an antenna or cable system)

Press MENU to display the menu main page.

or 6

Press

repeatedly to select

Press OK or

to access the submenu.

or 6 Tuning Band item

Press

to select

Press OK or

to select the Tuning Band.

Air, Cable, Cable HRC, Cable IRC and Cable Auto can be selected.

If using antenna, select Air;

If using cable, select one of Cable/Cable HRC/Cable IRC/Cable Auto according to your local area's cable

system. Normally please select Cable Auto. (For further band information, contact your cable service

provider.)

Auto Channel Search

Navigate to the Setup sub-menu and highlight Auto Ch Search.

Press OK or

to begin the auto channel search.

The unit will automatically search for all available TV/DTV (if

using antenna), CATV/CADTV (if using cable) program.

Note: If you want to stop the auto-search, press EXIT button.

Digital (CADTV) cable systems may cause several

unviewable channels to be memorized.

Manual Channel Set

After setting channels into memory, you can add or delete channels

from the default channel list as follows:

Navigate to the Setup sub-menu and highlight Manual Ch Set.

Press OK or

to open Manual Channel Set Menu sub-menu.

Use

or6

button

to select

to add or delete the channel.

Press EXIT button to exit.

Now when you use CH+/- button to cycle among the channels,

the deleted channels can not be selected.