Hdtv Side And Back Panels - Sanyo DP50747 Owner's Manual

HDTV SIDE AND BACK PANELS

SIDE PANEL
Power
key
Volume
+ – keys
Channel
M L keys
Œ
Analog / Digital Antenna Input, PAGE 5—
Connect an RF antenna or Analog Cable
system to this jack.

HDMI INPUT 1/2/3 (High-Definition Multi-
media Interface), PAGE 7—An all digital AV
interface that accepts uncompressed video
signals for the very best picture possible.
HDMI supports HDCP copy protection, allow-
ing transmission of copy-protected digital
content. The signal can also include Dolby
Digital or PCM audio, when available. HDMI
(DVI) INPUT 1 jack is compatible with DVI
equipped AV devices. (Separate audio con-
nection and an adapter are required for DVI
device.)
Ž
Analog Audio Out (L/R) Jacks, PAGE 9—
Connect external audio equipment here.

Component Video Input (VIDEO 2 or
VIDEO 3), PAGE 8—Connect digital video
equipment to the Y (Green), Pb (Blue), Pr (Red)
and Audio L / R jacks. These jacks automati-
cally detect the type of signal being received.
Need help?
6
Visit our Web site at
Œ  Ž
®
www.sanyoctv.com
or Call
  ‘
HDTV
BACK PANEL

Audio/Video Input (VIDEO 1), PAGES 9—
Connect analog video equipment here.
NOTE: S-Video connection overrides the (Video 1)
composite video connection.
‘
Digital Audio Output, PAGE 8—Use a Phono-
Type Digital Audio Out Cable to connect
Digital Audio Output to an advanced stereo
home theater system equipped with Dolby
Digital 5.1.
’
S-Video Input (VIDEO 1), PAGE 9—To enhance
video detail use the S-Video jack instead of the
Video jack, if available on your external equip-
ment. (S-Video connection will override
connection to the VIDEO 1 input jack.)
“
Service Jacks—For production use only.
”
AC IN 120V—Connect
(See page 5.)
1-800-877-5032
’ “
”
power cord here.
®