Changeover From Horizontal Carrying Position To Vertical Carrying Position; Instructions For Vertical Carrying Positions General Information - CYBEX first.GO User Manual

ChANGEOVER FROM hORIzONTAL CARRYING POSITION TO
VERTICAL CARRYING POSITION
1 2
3
4
5
INSTRUCTIONS FOR VERTICAL CARRYING POSITIONS
GENERAL INFORMATION
I
IIa
1. Step: At first remove the strap from the loop on the
2. Step: Open the buckles from the straps on both
3. Step: Now pull the two ends of the loops sewn on the
4. Step: Open the buttons to access the zipper. Now
5. Step: Now take the included belt and connect it with
WARNING: Please ensure that the ziPPer and
Both Buttons have Been Closed ComPletelY
AND SECURELY BEFORE USE!
Next please follow the instruction for vertical carrying
position.
When changing over to the horizontal carrying position
please follow procedure in reverse.
I. Spread-squat position: By opening and closing
IIb
IMPORTANT: it is more imPortant that the
Child is sitting in a squatting Position
rather than a sPreading Position.
II. height adjustment: The waist belt has the function
foot end from the inlay.
sides on the head area from the inlay.
outside from the inlay.
open the zipper.
the zipper on the carrier.
the lower zipper, the seat width can be adjusted.
very small children will already sit comfortably in
the required "spread-squat position" without any
adjustments to the seat area. For older children, the
seat area can be adjusted by opening the zipper over
the entire length. Children from approx. 10 months of
age should sit in the narrowest position, thus allowing
for more leg room and freedom of movement.
of a height adjustment system. (a) To carry smaller
children, the belt should be placed around the waist,
allowing the child to sit at a higher position. (b) For
larger children the belt should be placed around the
hips. The optimum sitting position is reached when
the carrying person can touch the child´s head with
the lips and should be adjusted accordingly.
49