Table of Contents
Advertisement
All manuals and user guides at all-guides.com
ASSEMBLY
Assembly requires two persons. Place all parts of the elliptical in a cleared area and remove the packing mate-
rials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver
and an adjustable
wrench
.
See the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. To avoid damaging parts, do not use power tools for assembly.
M8 Small
M10 Split
Wave Washer
M10 Washer
M8 Washer
Washer (18)–4
Washer (85)–20
(88)–4
(67)–14
(69)–4
M4 x 16mm
M8 x 19mm Button
M8 Locknut
M10 Locknut
M4 x 22mm
Screw (47)–4
Screw (57)–2
Screw (56)–4
(72)–4
(70)–2
M10 x 13mm Button
M8 x 38mm Button
M8 x 55mm Bolt
Screw (54)–14
Bolt (58)–4
Set (92)–2
M10 x 25mm Patch
M10 x 65mm Bolt
Screw (48)–4
Set (94)–2
M10 x 116mm Carriage Bolt (38)–2
M10 x 123mm Button Screw (87)–2
Thrust Washer
(66)–4
5
Advertisement
Table of Contents
