Maintenance - Milwaukee M18 SWITCH TANK Operator's Manual

APPLICATIONS
Before using any chemicals and/
WARNING
or solutions, read and follow all
original manufacturer instructions. Read all
provided with the chemical. Chemicals can cause
turer's instructions. Always wear eye protection.
Spraying
Pull the trigger and begin sweeping the nozzle from
side to side, coating the desired surface evenly in
accordance with chemical manufacturer's instruc-
Supplying Water
Fill the tank with clean water and then install onto
Attach water supply hose with the quick connect
Pull on the connection to be certain it is

MAINTENANCE

Maintaining Tool
Keep your tool, battery pack and charger in good
Inspect your tool for issues such as undue noise,
misalignment or binding of moving parts, breakage of
months to one year, depending on use, return the
tool, battery pack and charger to a MILWAUKEE
If the tool does not start or operate at full power with
a fully charged battery pack, clean the contacts on
erly, return the tool, charger and battery pack, to a
To reduce the risk of personal in-
-
WARNING
jury and damage, never immerse
-
soap and a damp cloth to clean, since certain clean-
ing agents and solvents are harmful to plastics and
turpentine, lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household deter-
Cleaning Electrical Contacts
Keep electrical contact posts between bottom of tank
WARNING! Remove battery pack
Tank
To reduce the risk of injury, always
WARNING
turer's instructions. Always wear eye protection.
Draining and Cleaning the Tank, Hose,
and Spray Wand
If there is any liquid left in the tank after spraying,
the chemical manufacturer's instructions for proper
To Drain:
WARNING! Always wear personal protec-
tive equipment (PPE) according to the chemical
6
Cleaning
Base
Contacts
-
-
-