Mounting The Gearbox - Stihl HL 90 Instruction Manual

English
Vertical cut
Swing the cutter bar up and down in an
arc as you move along the hedge – use
both sides of the cutting blades.
Any working position above head height
is tiring. To minimize the risk of
accidents, work in such positions for
short periods only.
8
Horizontal cut
Hold the cutter bar at an angle of 0° to
10° as you swing the hedge trimmer
horizontally.
Swing the cutter bar in an arc towards
the outside of the hedge so that the
cuttings are swept to the ground.

Mounting the Gearbox

N
Pull the protective cap off the end of
the drive tube.
The plug may come out of the drive tube
when you pull off the cap. Push it back
into the drive tube as far as stop.
HL 90 K