Assembly
WARNING
Do not plug in your deep cleaner until you are familiar with all instructions
and operating procedures.
The only tool you will need to assemble
your cleaner is a Phillips screwdriver.
1
2
Slide upper body
onto lower body.
4
5
Be sure to secure upper
handle before lifting. Rotate
lock collar to secure.
Tips Before Carpet Cleaning
• If cleaning an entire room, consider moving your furniture to another area.
• Remove any dry debris or loose impediments before using your deep cleaner.
• Pretreat tough stains as needed.
6
www.BISSELL.ca
3
Slide upper handle post
into the body by aligning
the pin and sliding the post
Secure with screws.
down into place.
6
Place clean water
tank on back of unit.
The tank will make a
"CLICK" noise when
Wrap power cord.
seated properly.