Replacing Belts & Brush Rolls - Bissell POWERCLEAN TURBOBRUSH PET 2085 Series User Manual

Replacing Belts & Brush Rolls
WARNING
To reduce the risk of electric shock, turn power switch OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting checks.
What you will need: 1 Phillips screwdriver & 1 fl athead screwdriver
1 2
Turn the machine off and
unplug from wall outlet.
3
Lay machine down to access the bottom of the machine. With a
Phillips head screwdriver, unscrew the belt cover and remove.
4
If you want to replace or clean the
brush roll, remove the belt by slightly
lifting the brush roll to maneuver the
belt and remove it. If the belt is broken
and needs to be replaced, remove it
and replace with a new belt.
Remove the clean water and collection tanks.
5
When removing the brush roll, the
brush roll cap will come with it. Do
not lose this part.
www.BISSELL.ca
11