Bissell POWERCLEAN TURBOBRUSH PET 2085 Series User Manual page 12

Replacing Belts & Brush Rolls (continued)
7
left
side
Clean or replace the brush roll and belt. When finished cleaning these parts, reassemble
them to the machine.
Insert the brush into the right side end cap. Adjust the right side of the brush into place
and tuck the left brush roll cap (separate piece that attaches to brush roll) into place.
8
Maneuver the belt to wrap
around the pulley. Wrap the belt
around the cog of the brush roll.
Secure the brush roll into place
by sliding the square piece to
align the brush roll.
NOTE: Manually rotate brush to make sure it rotates freely and the belt is aligned.
12
www.BISSELL.ca
right
side
Brush Roll
Brush Roll
Washers
End Cap
9
Reattach belt cover and screw into place.