Repeat Playback; Loop Playback (I-O Loop); Adjusting The Volume - Tascam BB-1000CD Owner's Manual

Portable cd/sd recorder
Hide thumbs Also See for BB-1000CD:
Table of Contents

Advertisement

nearest marker is indicated on the right side of the track
number.
Press the
key while pressing and holding the
MARK
key to delete the marker whose name is currently
LOOP
indicated.

Repeat playback

You can play a track repeatedly.
Press the
key. "
" appears and the current track is
LOOP
played back repeatedly.
To stop the repeat playback, press the
Loop playback (I–O LOOP)
With this function, you can continuously repeat the play-
back of a selection that you make (loop playback).
1.
Press the
key during playback to set the point
IN
when you want to start loop playback. The current
position is set as the
point.
IN
2.
Press the
key at the point when you want loop
OUT
playback to stop. The current position is set as the
point, and loop playback begins between the
OUT
and
points.
OUT
The current positions of the
shown by the
and
icons that appear below the play-
back position display bar in the lower part of the Home
screen. During loop playback the
appears.
Pressing the
key during loop playback slides the
¯
start point of the loop forward to its end point, keeping
the time length of the loop.
Pressing the
key during loop playback slides the
Â
end point of the loop back to its start point, keeping the
time length of the loop.
Press
key or
key while pressing and holding the
IN
OUT
key to clear the start point or end point, respec-
LOOP
tively.
NOTE
When the
point is not set, the part from the
OUT
point to the end of the track is played back repeatedly.
When the
point is not set, from the beginning of the
IN
track to the
point is played back repeatedly.
OUT
When the
and
points is not set, the whole track
IN
OUT
is played back repeatedly.
To cancel the Loop playback, press the
point and the
point remain and the loop playback of
OUT
the section starts again by pressing the
key.
LOOP
IN
and
points are
IN
OUT
indicator also
IN
key. The
LOOP
IN
key again.
LOOP

Adjusting the volume

Use the
knob to adjust the output volume of the
VOLUME
built-in speaker/
jack/
PHONES
indicator on the front panel lights during the adjustment.
7–Playback
jack. The volume
LINE OUT
37
TASCAM BB-1000CD

Advertisement

Table of Contents
loading

Table of Contents