Duplicating An Audio Cd; Changing Recording Settings; Auto Recording - Tascam BB-1000CD Owner's Manual

10–Other useful functions
9.
Load a blank disc and press the
The selected files are written onto the disc. If you
want to make another copy, load a new blank disc
following the messages on the screen after finishing
and press the key. Press the
F2
return to the screen.
COPY
Backing up an audio CD
You can create a backup disc of an audio CD.
NOTE
An SD card which has free space enough to copy the contents of
the CD is required for duplicating it.
1.
Press the key to open the
MENU
2.
Press the
CURSOR [ § / ¶
press the key.
ENTER
3.
Press the
CURSOR [ § / ¶
and press the key.
ENTER
4.
Load the SD card and the target CD and press the
key. The temporary copy to the SD card starts.
NOTE
A caution appears when the capacity is not enough. Insert an
SD card with enough space and press the F2 key to proceed to
the next step.
The CD is automatically ejected as the unit finish
copying it onto the SD card and the message to
prompt to insert a blank disc appears.
44
TASCAM BB-1000CD
key.
F2
key to finish and
F1
screen.
MENU
key to select and
] COPY
key to select
] CD BACKUP
5.
Load a blank disc and press the
The duplication starts. The disc is automatically
ejected after finishing duplication. If you want to
make another copy, load a new blank disc and press
the key. Press the
F2
the screen.
COPY

Changing recording settings

You can change the various settings relating to recording
on the
REC SETTING

Auto recording

You can set the unit to start/stop recording automatically
from recording-on-standby depending on the status of input
signals. It is convenient when you need to start recording
from the position far from the unit.
1.
Press the
MENU
2.
Press the
F2 CURSOR [
and press the
ENTER
3.
Adjust the four settings below.
AUTO LEVEL:
Set the signal level at which recording starts/stops auto-
matically.
START:
While set to
ON
unit is on-standby for recording and detects an input sig-
nal whose level is higher than that set on
STOP:
Set the time from detecting the input signal level lower
than that set on
on-standby.
DIVIDE:
When setting this to
as the input signal level becomes higher than that set on
again after 2 second or more declining
AUTO LEVEL
signal level.
key.
F2
key to finish and return to
F1
screen.
key to open the screen.
MENU
key to select
§ / ¶ ] REC SETTING
key.
, recording automatically starts as the
AUTO LEVEL
to stopping recording to
AUTO LEVEL
, the recording file is divided
ON
.