Table of Contents
Advertisement
UTG1000A Series Function Generator User Manual
Carrier Wave Frequency Setting
Settable range of pulse wave frequency is from 500uH to 25MHz, and the default frequency is 1kHz.
Press Parameter→ Frequency softkey to change frequency, then enter required numerical value, and
select unit.
Carrier Wave Duty Cycle Setting
Settable range of pulse wave duty cycle is 0.01%~99.99%, and the default duty cycle is 50%. Press
Parameter→ Frequency softkey to change, then enter required numerical value, and select unit.
Modulation Source Selection
The device can select internal modulation source or external modulation source. If need to change,
press Parameter→ModulationSource→External in turn.
1) Internal Source
65
Advertisement
Table of Contents
