Table of Contents
Advertisement
Function interface is shown in figure 2-3:
Channel Information
Waveform
Parameter
List
Detailed Description:
Channel information: 1) "ON/OFF" on the left is channel open information. 2) There is a "Limit" logo
indicates output range limit where white is valid and grey is invalid. The matched impedance of
output terminal (1Ω to 1KΩ adjustable, or high resistance, factory default is 50Ω). 3) The right side is
the current valid waveform.
Softkey labels: Softkey labels are used for identifying menu softkey functions and menu operation
softkey functions.
1) Labels on the right of screen: Highlighted display indicates that the label is selected. If not,
press corresponding softkey to select.
2) Labels at the bottom of screen: Sub label contents belongs to the next category of Type label.
Press corresponding button to select sub labels.
Waveform Parameter List: Displays parameters of current waveform in a list.
Waveform Display Area: Displays current channel's waveform.
UTG1000A Series Function Generator User Manual
Softkey
Labels
Figure 2-3
14
Softkey
Labels
Advertisement
Table of Contents
