Related Manuals for UNI-T UTG2000B Series
Summary of Contents for UNI-T UTG2000B Series
- Page 1 Quick Guide UTG2000B Series Function/Arbitrary Waveform Generator 2011.09. UNI-T Technologies, Inc.
-
Page 3: Preface
Hello! Thank you for choosing this brand new Uni-Trend device. In order to use this instrument safely and correctly, please read this manual thoroughly, especially the Safety Notes part. After reading this manual, it is recommended to keep the manual at an easily accessible place, preferably close to the device, for future reference. UTG2000B Series... -
Page 4: Copyright Information
Any maintenance on altered or integrated products (if such alteration or integration leads to an increase in time or difficulty of product maintenance). This warranty written by UNI-T for this product, and it is used to substitute any other expressed or UTG2000B Series... - Page 5 Regardless of whether UNI-T and its distributors are informed that any indirect, special, incidental, or consequential damage may occur, the UNI-T and its distributors shall not be responsible for any of the damages. UTG2000B Series...
-
Page 6: Introduction
● Compatible 7 digits TTL level signal ● 4.3 inches TFT color screen with USB Host(max.32G), USB Device, LAN, 10MHz clock source input, 10MHz clock source output ● Powerful upper computer software ● Easy-to-use multi-functional knob and numeric keypad UTG2000B Series... -
Page 7: Table Of Contents
2.4.3 Set DC offset voltage ....................12 2.4.4 Set square wave ......................13 2.4.5 Set pulse wave ......................13 Chapter 3 Service and Support......................15 3.1 Program Upgrade of Product ....................15 3.2 Outline of Warranty......................15 3.3 Contact Us ..........................15 UTG2000B Series... -
Page 8: Chapter 1 Safety Information
EN61010-1/2 safety standard during design and manufacturing. It complies with the safety standards for over voltage CAT II and pollution level II. If the equipment is used in a manner not specified by the manufacturer, the protection provided by UTG2000B Series... - Page 9 Please read the following safety preventative measures: To avoid electric shock and fire, please use the dedicated UNI-T power supply appointed to the local region or country for this product. This product is grounded through the power supply ground wire. To avoid electric shock, grounding conductors must be connected to the ground.
-
Page 10: Chapter 2 Quick Start
● User CD------------------------------------------------------------------1PCS ● User manual------------------------------------------------------------1PCS ● Warranty-----------------------------------------------------------------1PCS If any of the accessories are missing or damaged, please contact UNI-T or local distributors of this product. 2.1.3 Machine Inspection If the instrument appears to be damaged, not working properly, or has failed the functionality test, please contact UNI-T or local distributors of this product. -
Page 11: Panels And Buttons
2.3 Panels and Buttons 2.3.1 Front Panel UTG2000B series provides users with a simple, intuitive, and easy to operate front panel. The front panel is shown in figure 2-1: USB port ON/OFF Display Screen Main Menu Button Secondary Menu Button... -
Page 12: Rear Panel
External analog modulation input connector External digital modulation/ frequency meter connector LAN port USB port External 10MHz input connector Internal 10MHz output connector Ventilation vent Fuse Power switch 10. AC power supply 2.3.3 Function Interface Function interface is shown in figure 2-3: UTG2000B Series... -
Page 13: Basic Waveform Output
Steps for setting the frequency to 2.5MHz: Press Menu → Wave → Param → Freq in turn to set the frequency. Pressing Freq to edit frequency or period. Press the number keyboard to input 2.5. Select corresponding unit on the bottom bezel menu: MHz UTG2000B Series... -
Page 14: Set Output Amplitude
Press Menu → Wave → Param → Offset Use number keys to input the required number of -150. Select corresponding unit mV. Note: if the current DC offset value is valid, use this value. Press offset again, the parameters UTG2000B Series... -
Page 15: Set Square Wave
Period. Enter required number value and select the unit. When entering duty ratio value, there is a label at the bottom of display, and select 25%. Press Param to enter sub menu to set falling edge time, then press Fall to enter required UTG2000B Series... - Page 16 Note: This parameter can be set by multifunctional knob and direction buttons. UTG2000B Series...
-
Page 17: Chapter 3 Service And Support
UNI-T (Uni-Trend Technology (China) Limited) guarantees that the products it produces and sells are free from any defects of material and process within 3 years from authorizing the dealer to deliver them. If the product is proven to be defective during warranty period, UNI-T will repair and replace according to provisions of warranty. - Page 18 This user manual may be revised without prior notice UTG2000B Series...
- Page 19 UTG2000B Series...