Invacare Twilight ISP2000L LARGE Assembly, Installation And Operating Instructions page 8

All manuals and user guides at all-guides.com
REASSEMBLY
Nasal Mask
Nasal Mask
Channel
Cushion Ribbing
FIGURE 3 - DISASSEMBLING/REASSEMBLING THE
NASAL CUSHION TO THE MASK SHELL
NOTE: Ensure the nasal cushion is COMPLETELY seated in the channel
before use. When properly assembled, the nasal cushion and mask shell
should form a smooth, continuous surface.
5. After the nasal mask cushion is securely reassembled, rinse the
entire mask thoroughly and allow to air dry out of direct sunlight.
NOTE: Make sure the mask is dry before use. Inspect the mask after
cleaning.
Replace the mask if any parts are damaged or
deteriorated.
Nasal Mask
Channel
Cushion Ribbing
CAUTION
Nasal Mask
Cushion