Cleaning The Mask And Headgear - Invacare Twilight ISP2000L LARGE Assembly, Installation And Operating Instructions

All manuals and user guides at all-guides.com
HEADGEAR/MASK REMOVAL, CLEANING
REMOVING THE MASK AND HEADGEAR
(FIGURE 2)
1. Place your thumb and forefinger around one of the headgear
clips and gently pull the headgear clip away from your face.
NOTE: It is not necessary to remove the headgear straps from the clips
or the forehead support when removing the mask.
2. Pull the mask forward and lift it up and over the head.
Headgear
Clip
FIGURE 2 - REMOVING THE MASK AND HEADGEAR

CLEANING THE MASK AND HEADGEAR

ALWAYS be sure to remove any foreign material (dirt,
lint, etc.) from the exhalation ports.
DO NOT use bleach, chlorine, aromatic-based cleaning
solutions, scented oils, or moisturizing or antibacterial soaps,
to clean the cushion, mask frame, headgear, or air tubing.
These solutions may cause hardening and reduce the life of
the product.
Alcohol may be used to clean the silicone nasal cushion
ONLY. DO NOT use alcohol to clean the mask
frame, head gear or air tubing.
Headgear
Clip
CAUTION