Omron Total Power + Heat PM800 Instruction Manual page 26

3. GET STARTED WITH YOUR THERAPY
3.4 Adjusting Intensity Level
The Intensity Level is set at "3" when the therapy starts.
Actual intensity level will start at "1" and slowly increase to "3".
When the device is in "TENS" stimulation, press [ ] [ ] or [ ] [ ] button to increase or decrease
intensity. Adjust the intensity level from "1" to "20" until you feel a gentle pulsing sensation.
How do I select the intensity level properly for my pain?
If the stimulation sensation becomes weaker or disappears, increase the intensity until it is restored. If
the sensation is at all uncomfortable, press [ ] or [ ] button to decrease the intensity.
• Press [ ] or [ ] button for higher intensity.
• Press [ ] or [ ] button for lower intensity.
How long does the therapy last?
The device automatically stops after 30 minutes. We recommend a maximum of one 30-minute
therapy in one sitting, up to three times/day.
The screen shows you how many minutes are remaining.
Intensity level
out of 20 levels
Minutes left out
of 30 minutes
26