Loading Camera Settings; Loading Camera Settings When The Camera Power Is On; Camera Settings Initialization - Omron STC-SBE132POE Product Specifications And User's Manual

Loading Camera Settings

ROM
UserSetX
ROM
Default
UserSetSelector
Setting Procedure
1. Select "UserSetX" (or Default) at "UserSetSelector"
2. Execute "UserSetLoad"

Loading Camera Settings when the Camera Power is on

ROM
UserSetX
ROM
Default
UserSetSelector
Setting Procedure
1. Set "UserSetX" or "Default" at "UserSetDefault"

Camera Settings Initialization

Please follow the below procedure for the camera settings put back to the factory default settings.
Setting Procedure
1. Selects "Default" at "UserSetSelector".
2. Executes "UserSetLoad".
3. Select "UserSet1" at "UserSetSelector".
4. Executes "UserSetSave".
STC-SBE132POE / STC-SCE132POE
Product Specifications and User's Guide
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
Camera
Setting
Selector
Camera
Setting
Selector
When UserSetLoad is executing,
the camera settings load from the selected
ROM that was selected at "UserSetSelector"
to the register at RAM.
When the camera power is on,
the camera settings load from the selected
ROM that was selected at "UserSetDefault"
to the register at RAM.
No.14S002-08
41/53