Counterandtimercontrol; Eventcontrol; Analogcontrol - Omron STC-SBE132POE Product Specifications And User's Manual

CounterAndTimerControl

Name
CounterSelector
CounterEventSource
ConterDecrementEventSource
CounterResetSource
CounterResetActivation
CounterValue
CounterDuration
CounterStatus
CounterTriggerSource
TimerSelector
TimerDurationRaw
TimerDelayRaw
TimerTriggerSource
TimerTriggerActivation
TimerGranularityFactor
TimerPeriod
TimerFrequency

EventControl

Name
PLC
IPEngineCamHeadSerialComLog
EventSelector
EventNotification

AnalogControl

Name
GainSelector
Gain
GainRaw
GainAbs
GainAuto
BlackLevelSelector
BlackLevel
STC-SBE132POE / STC-SCE132POE
Product Specifications and User's Guide
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
Description
Selects which Counter to configure.
Select the events that will be the source to increment the Counter.
Selects the event that decrements the counter.
Selects the signals that will be the source to reset the Counter.
Selects the Activation mode of the Counter Reset Source signal.
Reads or writes the current value of the selected Counter.
Sets the duration (or number of events) before the CounterEnd event is generated.
Returns the current status of the Counter.
Selects the source to start the Counter.
Selects which Timer to configure.
It sets the duration in device-specific unit of the Timer pulse.
It sets the duration in device-specific unit of the delay to apply after the reception of a
trigger before start the Timer.
Selects the source of the trigger to start the Timer.
Selects the activation mode of the trigger to start the Timer.
Controls the granularity of the TimerDurationRaw and TimerDelayRaw features (in
increments of up to 30 nseconds).
Returns the period, in ns, of the selected timer.
Returns the frequrency, in Hertz, of the selected timer.
Description
Category that contains the PLC event features.
Category that contains the IP engine to camera head serial communication log event
features.
Selects which Event to signal to the host application.
Activate or deactivate the notification to the host application of the occurrence of the
selected Event.
Description
Selects which Gain is controlled by the various Gain features.
Controls the selected gain as an absolute physical value. This is an amplification factor
applied to the video signal.
Controls the selected gain as an absolute physical value. This is an amplification factor
applied to the video signal.
Controls the selected gain as an absolute physical value. This is an amplification factor
applied to the video signal.
Sets the automatic gain control (AGC) mode. The exact algorithm used to implement
AGC is device-specific.
Selects which Black Level is controlled by the various Black Level features.
Controls the black level as an absolute physical value. This represents a DC offset
applied to the video signal.
No.14S002-08
47/53