TANDBERG 3000 MXP Profile User Manual page 225

2 Audio Outputs

1 output (line level) via RCA connector providing audio from far end in addition to dial
tones. This output is used by the monitor. This output also supports S/PDIF.

1 VCR output (line level) via RCA connector providing a mixed signal between audio from
the local side (except from the VCR input) and audio from the far end. This output is
intended for connection to a VCR.
Audio output connector specification:
Connector label
Signal type
Connector (codec)
Output impedance
Max output level when set
to maximum output level
and volume control set to
max.
Max output level when set
to minimum output level and
volume control set to max.
Range, menu adjustable
output gain
Volume control attenuation
(audio out 1)
* Additional attenuation is possible on room/loudspeaker audio output using the volume control
setting
Audio outputs
Unbalanced
Female RCA/phono, sleeve-ground,
centre-signal
680 ohms
15.5 Vpp
1.2 Vpp
22.5 dB (16 steps of 1.5 dB)*
0 to 21 dB + mute (steps of 1.5 dB)
Peripheral Equipment
215