Sending Your Snapshot Images - Yaesu FT3Dr Instruction Manual

Sending Your Snapshot Images

Take still images using the optional speaker microphone with built-in snapshot camera
(MH-85A11U) and send them to the group members.
For details on how to send images taken with the optional speaker microphone built-in
snapshot camera (MH-85A11U), refer to "Taking Picture (Snapshot Function)" in FT3DR/DE
Operating Manual.
1. Press the [GM] key.
The GM function activates and displays stations using
the GM mode on the same frequency, or stations oper-
ating in DN mode, within the communication range.
2. Touch [LOG].
3. Touch [PICT].
Displays the list of images saved on the micro-SD
memory card
4. Touch the image you want to send.
Displays the selected image.
5. Touch [SEND].
6. Touch [ALL].
• "SEND to ALL ?" appears.
• To send the message to a specific member, touch the member that is within com-
munication range.
• Messages cannot be sent to members outside of communication range.
• The address designation "to:" is merely for displaying "ALL" or the call sign of a
specific station. In other words, even if you specify a call sign for "to:" to send a
message, other stations operating GM on the same frequency can also read the
message if they are within the communication range.
7. Touch [OK].
Sends the image.
13
JA1YOE-123 16:24
JA1YOE-123 06/02
JA1YOE-123 05/24
JA1YOE-123 03/14
JA1YOE-123 02/14