OfficeServ 7400
TECHNICAL MANUAL
3.4 CONNECTING POWER FAIL TRANSFER
The OfficeServ 7400 offers a Power Fail Transfer feature for analog single line telephones that
are connected to port 1 on the 8SLI/8SLI2, 16SLI2, or 16MWSLI cards.
In case the OfficeServ 7400 loses power from its AC source, and no battery backup is available,
this feature is automatically activated. The analog telephone connected to port 1 of the SLI
will get C.O. dial tone (direct C.O. line access) activated by an internal relay. For this feature to
work, the SLI ports must be wired as shown in Figure 3.51 Pin 4 (TIP) and Pin 5 (RING) from a
port on the 8TRK/8TRK2 card must be connected to Pin 1 (TIP) and Pin 2 (RING) on port 1 of an
SLI card.
5 4
Figure 3.60 Power Fail Transfer Connection to 16MWSLI/16SLI2/8SLI/8SLI2
Figure 3.59 CNF24 Progress Bar
Figure 3.17 Power Fail Transfer Connection to 16SLI/8SLI
2 1
3.66
Home Page
Home Page
Table of Contents
Table of Contents
INSTALLATION
PART 3 JANUARY 2011
SINGLE LINE PHONE