Figure 3.11 Front View Of The Lp40; Table 3.4 Ports And Leds Of The Lp40 - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
Ports & LEDs
LAN LED
SM LED
MDM LED
3.2.5 LP40 LEDs
The front view of the LP40 board is shown in the picture below.
The components on the front panel of the LP40 have the functions below:
Ports & LEDs
LINK1~LINK3
Status of LAN operation
- Off: No-power and no-connection of LAN port
- On: The color of the LED shows the LAN transmission speed and connection
speed
• On (Green): Good connection + Operation at 100Mbps
- Blink (Green): Good connection + Operation at 10Mbps
SD/Smart Media/MMC+Access Status
- Off: No SD/Smart Media/MMC+
- On: The color of the LED shows the mounting status and the normal
operation status after access
• On(Green): Mounted + Normal Operation
• On(Red): Non-mounted or Mounted + Abnormal Operation
- Blink (Green): SD/Smart Media/MMC+ is mounted and in access mode
MODEM Daughtercard status
- Off: No-MODEM
- On(Green): MODEM mounted
- Blink (Green): On transmitting data

Figure 3.11 Front View of the LP40

Table 3.4 Ports and LEDs of the LP40

Ports for connecting MP40 with LP40
3.11
Home Page Home Page
Function Description
Function Description
Table of Contents Table of Contents
INSTALLATION
PART 3 MAY 2010