OfficeServ 7400
TECHNICAL MANUAL
2.3.2 Required Tools
A mid-sized Phillips screwdriver
A bracket and three screws for attaching cabinet to rack mount
Two brackets and six screws for rack mount
Two screws for fastening
2.3.3 Installing in a Rack
The procedure for installing the OfficeServ 7400 cabinet inside a 19-inch rack is as follows:
1) Attach the cabinet bracket to the bottom surface of the OfficeServ 7400 cabinet and
fasten the bracket firmly with the three screws.
Figure 2.1 Tools Required for Rack Installation
Figure 2.2 Rack Installation (1)
2.2
Home Page
Home Page
Table of Contents
Table of Contents
INSTALLATION
PART 2 MAY 2010