Table 3.13 Ports And Leds Of The 16Sli2/16Mwsli - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
3.3.10 16SLI2/16MWSLI
This board provides 16 ports for connecting analog stations. It can go into any universal slot of
any cabinet. Add as many as needed. This card automatically detects DTMF or dial pulse signals
from the SLT. This card has no DTMF receiver. It will share the system resources. If there is a high
concentration of SLI cards, and MFM or CRM daughterboard must be added to relieve
congestion. MFM and CRM's can be added to the LP40.
FRONT VIEW OF 16SLI2/16MWSLI
The front view of the 16SLI2/16MWSLI board is shown below.
Front panel components of the 16SLI2/16MWSLI:
Ports & LEDs
P1~P16
 The 16MWSLI supports Message Waiting Lamp functionality for analog stations that have
this capability.
 Port 1 supports Power Failure Transfer function
Figure 3.29 Front View of the 16SLI2
Figure 3.30 Front View of the 16MWSLI

Table 3.13 Ports and LEDs of the 16SLI2/16MWSLI

Function Description
Analog Extension Ports
3.30
Home Page Home Page
(Refer to Section 3.4).
Table of Contents Table of Contents
INSTALLATION
PART 3 MAY 2010