Table of Contents
Advertisement
OPERATION
Page title
Item
PageNo.
<EXT SWITCH>
RET CTRL
CONNECTOR
14
<RETURN>
RET1 SW SEL
15
RET2 SW SEL
RET3 SW SEL
RET1 SW + RET2 SW RET1 SW, RET3 SW
VBS RET ASPECT
Settings
RET1 Pin5:
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, INCOM 1,
INCOM 2, EXTENDER,
D.EXTENDER, 5600K, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
VTR S/S, TALLY R, TALLY G,
TALLY Y
RET2 Pin6:
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, INCOM 1,
INCOM 2, EXTENDER,
D.EXTENDER, 5600K, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
VTR S/S, TALLY R, TALLY G,
TALLY Y
RET3 Pin4:
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, INCOM 1,
INCOM 2, EXTENDER,
D.EXTENDER, 5600K, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
VTR S/S, TALLY R, TALLY G,
TALLY Y
INCOM1 Pin1:
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, INCOM 1,
INCOM 2, EXTENDER,
D.EXTENDER, 5600K, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
VTR S/S, TALLY R, TALLY G,
TALLY Y
INCOM2 Pin2:
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, INCOM 1,
INCOM 2, EXTENDER,
D.EXTENDER, 5600K, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
VTR S/S, TALLY R, TALLY G,
TALLY Y
(CCU RET1), (CCU RET2),
(CCU RET3), (CCU RET4)
(CCU RET1), (CCU RET2),
(CCU RET3), (CCU RET4)
EC, SQ
Description
This function works when each pin of the RET CTRL
connector contacts with GND (Pin3).
TALLY R, G, Y are available only when using the
camera as a standalone device, and make the tally
lamp light. VTR S/S is available only when using the
camera as a standalone device, and makes the R
tally lamp light.
VTR S/S signal is embedded in the video.
Varies based on the RET1 button setting.
Settings in ( ): Display only
Varies based on the RET2 button setting.
Settings in ( ): Display only
Settings in ( ): Display only
Changes operation when you press both the RET1
button and RET2 button at the same time.
RET1 SW: The two buttons function as the RET1
button.
RET3 SW: The two buttons function as the RET3
button.
Sets the Aspect mode of the VBS RET when the
camera is used in standalone operation.
EC: Edge Crop
SQ: SQeeze
39
Advertisement
Table of Contents
