Table of Contents
Advertisement
Menu page title
<OUTPUT FORMAT>
<TEST OUT>
<SDI OUT>
<ROM VERSION>
For the items on each page, see the corresponding source
menu page in the table in "Menu List" (page 27).
The USER MENU CUSTOMIZE menu allows you to configure a
USER menu that consists only of pages and items that you need
by adding, deleting or replacing the pages.
Editing by items
The USER MENU CUSTOMIZE menu allows you to add a
new page to the USER menu and add desired items to the
page.
While the EDIT page contains factory-preset items, the USER
1 EDIT to USER 19 EDIT pages are all blank in their initial
state. You can register up to 10 items, including blank lines, on
each of these pages.
To add items to a page
Proceed as follows:
1
While pressing the MENU SELECT switch toward
ENTER, move the DISPLAY switch from OFF to
MENU.
The TOP MENU screen appears.
2
Turn the MENU SELECT knob to move the arrow
marker (
) to "USER MENU CUSTOMIZE", then press
,
the MENU SELECT switch toward ENTER.
If this is the first time the USER MENU CUSTOMIZE
menu has been displayed, the CONTENTS page of the
menu appears.
CONTENTS
xx
01.EDIT PAGE
02.USER 1 EDIT
03.USER 2 EDIT
c
04.USER 3 EDIT
05.USER 4 EDIT
06.USER 5 EDIT
07.USER 6 EDIT
08.USER 7 EDIT
09.USER 8 EDIT
10.USER 9 EDIT
If the USER MENU CUSTOMIZE menu has been used
before, the last accessed page appears.
3
If the CONTENTS page is displayed, turn the MENU
SELECT knob to move the arrow marker (
USER 1 EDIT to USER 19 EDIT, then press the MENU
SELECT switch toward ENTER to display the page.
If a different page is displayed, turn the MENU SELECT
knob until the desired page appears, then press the
MENU SELECT switch toward ENTER.
USER
Source menu / page No.
menu
No.
U11
MAINTENANCE
M10
U12
MAINTENANCE
M11
U13
MAINTENANCE
M12
U14
DIAGNOSIS
D03
E00
TOP
) to one of
,
Example: When you select the USER 2 EDIT page
USER 2 EDIT
c
4
Move the arrow marker (
(this operation is unnecessary, if no item exists on the
page as shown in the figure for step 3), then press the
MENU SELECT switch toward ENTER.
The EDIT FUNCTION screen appears.
EDIT FUNCTION
INSERT
c
MOVE
DELETE
BLANK
5
Move the arrow marker (
the MENU SELECT switch toward ENTER.
The page for the last added item appears.
<SW STATUS>
FLARE
GAMMA
BLK GAM : OFF
KNEE
WHT CLIP:
DETAIL
LVL DEP :
SKIN DTL: OFF
MATRIX
6
Add the items.
1 Turn the MENU SELECT knob until the page that has
the desired items appears, then press the MENU
SELECT switch toward ENTER.
2 Turn the MENU SELECT knob to move the arrow
marker (
) to the desired item, then press the MENU
,
SELECT switch toward ENTER.
The USER 2 EDIT page appears again, displaying the
newly added item.
7
Add the remaining items by repeating steps 4 to 6.
You can add up to 10 items on one page.
To delete items from a page
Proceed as follows:
1
Move the arrow marker (
and press the MENU SELECT switch toward ENTER.
The EDIT FUNCTION screen appears.
2
Select "DELETE," and press the MENU SELECT
switch toward ENTER.
24
E03
TOP
) to the item to be added
,
ESC
) to "INSERT", and press
,
P01
ESC
:
ON
c
:
ON
:
ON
ON
:
ON
ON
: OFF
) to the item to be deleted,
,
Advertisement
Table of Contents
