Messages and Error Codes
Introduction
This Appendix contains information on messages and error codes displayed on the
scanner.
Messages
The scanner displays messages when certain actions are performed. If the scanner
displays a message that is unfamiliar, contact the Symbol Support Center on page xi.
Unit Cradled
Battery Temperature Out Of
Range
Pairing Unsuccessful
Push ENTER & Try Again
Failed to initiate
download-Press ENTER
Appendix D
Table D-1. Scanner Messages
Message
Description
Scanner is properly inserted in the cradle
Battery temperature is out of range. Contact a
Symbol Support Center on page xi.
The scanner has not been successfully paired with
the base (cradle). Press ENTER and then try to pair
the scanner and cradle again.
New firmware was not successfully downloaded to
the device. This message can be displayed while
downloading new firmware to either the scanner or
base. Cycle power (power off then on) to the base
and try again.
D-1