Host Response Timeout - Symbol P370 Product Reference Manual

P470/370 RF Scanner Product Reference Guide

Host Response Timeout

This parameter indicates how long the scanner will wait for a response from the cradle, after
the cradle has sent its data to the attached host device. The timeout ranges from 5 seconds
to 64 seconds, in 1 second increments. The default is 5 seconds.To change the timeout
value, scan the bar code below, then scan two bar codes using the Numeric Bar Codes on
page 5-101.
HOST RESPONSE TIMEOUT (RANGE OF 5 TO 64 SECONDS)
5-12