Rts Line State; Beep On <Bel - Symbol DS 6608 Product Reference Manual

7-18 DS 6608 Product Reference Guide
Host Serial Response Time-out (continued)
Maximum: 9.9 Sec

RTS Line State

This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to select Low RTS or High RTS line state.
*
Host: Low RTS
Host: High RTS
Beep on <BEL>
When this parameter is enabled, the digital scanner issues a beep when a <BEL> character is detected on the RS-232 serial line.
<BEL> is issued to gain a user's attention to an illegal entry or other important event.
Beep On <BEL> Character
(Enable)
*
Do Not Beep On <BEL> Character
(Disable)